PFP Logo

High Velocity Oil Flushing Services

High Velocity Oil Flushing Services (HVOF) for removing contaminants, debris, and construction residue from lube oil and hydraulic systems. We provide turnkey oil reclamation & flushing across the United States and Canada.

Call (888) 679-6645 to speak with a high velocity oil flushing specialist.

  1. Home
  2. Services
  3. High-Flow Turbulent Oil Flushing Service

Nationwide, On-Site Service

Reliable on-site service for the U.S. and Canada.

24/7 Technical Support

Application guidance from industrial flushing experts.

ISO Cleanliness Reporting

Detailed documentation of fluid cleanliness.

High Flow Oil Flushing Services

Call (888) 679-6645 for immediate assistance.

Discuss your unique application requirements with an experienced team of filtration & flushing specialists.

HIGH VELOCITY FLUSHING SERVICES

Oil Flushing Services for Industrial Lube Oil & Hydraulic Systems

Precision Filtration Products performs High Velocity Oil Flushing Services (HVOF) to remove harmful contaminants like rust, scale, and particulate matter from industrial oil and fuel systems using turbulent flow.

Our high velocity oil flushing services create turbulent flow, achieving a Reynolds Number far greater than 4,000. This process efficiently removes all harmful contaminants, ensuring that your piping meets or surpasses the strict cleanliness standards set by top OEMs. Our certified technicians are rapidly dispatched to your facility with the knowledge required to service your equipment and ensure that you hit your target ISO cleanliness codes.

Our oil flushing services can achieve an ISO oil cleanliness level of 14/12/9 within minutes.

01 Lube Oil Reservoirs ✓
02 Compressor Systems & Refrigeration ✓
03 Hydraulic Systems ✓
04 Steam & Gas Turbine Systems ✓
05 Process Piping Systems ✓
06 Stationary Engines ✓
Our Service Process

Our High Velocity Oil Flushing Process

A proven, step-by-step oil flushing service process that delivers clean, reliable results for your lube oil, hydraulic, and industrial systems.

  1. 1

    System Assessment & Planning

    Review system design, cleanliness targets, and operating requirements.

  2. 2

    Setup & Configuration

    Mobilize equipment, connect to the system, and establish effective high-flow circulation.

  3. 3

    High-Velocity Flushing

    Circulate oil at high velocity to dislodge and remove contaminants.

  4. 4

    Oil Reclamation & Conditioning

    Continuously filter the oil to remove contaminants and restore cleanliness.

  5. 5

    Cleanliness Verification

    Verify results with on-site fluid analysis and cleanliness measurements.

  6. 6

    Final Reporting

    Provide a detailed report with results, cleanliness levels, and service documentation.

TURNKEY OIL FLUSHING SERVICES

Why Choose PFP for Oil Flushing Services?

Precision Filtration Products (PFP) is a leading nationwide provider of high-velocity oil flushing services working directly with industrial facilities throughout the United States and Canada. Every High Velocity Oil Flushing Service from PFP is supported by expert technicians and an extensive fleet of industrial flushing equipment. Our oil flushing services support system cleanliness before equipment startup, during preventative maintenance, and throughout oil conversion projects.

Nationwide Service Coverage

PFP mobilizes experienced field service technicians to operate high velocity flushing equipment at industrial facilities throughout the U.S. and Canada. 

Expert On-Site Service

Our expert technicians & engineers work directly with your facility to configure flushing circuits, monitor turbulent conditions, and achieve required cleanliness targets. 

Turnkey Oil Flushing Solutions

From initial system evaluation and equipment selection to on-site flushing and cleanliness verification, PFP manages every stage of the process.

On-Site Fluid Analysis & Documentation

As part of our high-flow oil flushing services, we provide on-site diagnostics where we verify that your system is clean. After a full oil analysis, you will receive a formal report documenting the results.

PFP's Rental Fleet of Industrial Filtration Equipment, ASME coded

INDUSTRIAL OIL FLUSHING EQUIPMENT

Utilize an Extensive Fleet of High Velocity Flushing Equipment

Precision Filtration Products supports its high velocity oil flushing services with an extensive fleet of industrial flushing skids and mobile flushing units, designed to accommodate flow rates from 1 GPM to over 6,000 GPM.

From compact filter carts to large-scale flushing skids, our equipment is maintained to OEM standards and engineered to achieve project-specific cleanliness requirements. Custom flushing skids and equipment configurations are available to accommodate specialized system requirements and demanding applications. Browse our equipment. 

HIGH VELOCITY FLUSHING APPLICATIONS

When Are Oil Flushing Services Needed?

Prepare Systems Before Commissioning

Before new or rebuilt equipment is commissioned, PFP performs high velocity flushing services to remove manufacturing debris, installation contaminants, and residual particulate matter from lubrication and hydraulic systems. Our technicians utilize high-flow flushing equipment from our extensive fleet of flushing units to establish turbulent flow. Our units will operate to dislodge accumulated debris, and filter contaminants in order to help achieve the required ISO cleanliness targets before startup. 

Support Preventative Maintenance

PFP offers high velocity flushing services during scheduled maintenance or equipment outages. Once a flush plan is developed in coordination with you facility, our technicians will circulate and filter flushing fluid through system piping, helping to restore system cleanliness while reducing premature eqiupment wear. Ultimately, our oil flushing services hlp minimize the risk of costly, unplanned downtime. 

Clean Systems During Oil Conversion

When industrial facilities transition between lubricant types (or change oil formulations), PFP performs high-velocity flushing to remove residual oil, contamination, and deposits that could compromise the performance of the replacement lubricant. Our technicians utilize controlled flushing procedures and high-flow filtration equipment to clean system piping/fluid circuits to help prepare equipment for the introduction of new lubricants. 

Emergency Oil Contamination & System Recovery

Following equipment failures or significant contamination events, PFP is always ready to deploy our expert service technicians alongside high velocity flushing equipment to remove harmful contamination from affected oil systems in emergency situations. Our team excels at overcoming flushing & filtration challenges, especially when downtime is non-negotiable. 

Case Study

Steel Manufacturer Saved by High Velocity Oil Flush

Following a critical equipment failure, PFP performed high velocity oil flushing services for a major steel manufacturer, achieving cleanliness levels exceeding project requirements. 

Read the full case study.

Documentation

High Velocity Oil Flushing Services Brochure

Learn more about PFP’s High Velocity Oil Flushing (HVOF) service. Download

Selecting Target ISO Cleanliness Codes

Learn more about ISO Cleanliness Codes for high velocity flushing. Download

FAQs

What is high velocity oil flushing?

High velocity oil flushing is a process used to clean lubrication and hydraulic systems by circulating fluid at high Reynolds numbers (typically >4000) to induce turbulent flow. This turbulence removes built-up contaminants like sludge, varnish, and debris from pipe walls and equipment internals. It’s commonly used before system startup or after major repairs in critical systems such as turbines, compressors, and gearboxes.

Where can PFP provide High Velocity Flushing Services?

Precision Filtration Products is a nationwide provider of High Velocity Flushing Services. While we mainly provide high velocity flushing in the continental United States, we are capable of deploying turnkey flushing services and personnel in Canada, Hawaii, and Alaska.

Contact our customer service team to discuss the location of your flushing project.

What types of systems does PFP flush?

We flush a wide range of systems including turbine lube oil systems, hydraulic circuits, gearboxes, compressors, diesel engine skids, and more. Whether it’s power generation or industrial manufacturing, we tailor the flushing method to your equipment.

How long does the oil flushing process take?

The duration of the flush depends on system size and contamination level. Smaller systems may take a few hours, while large turbine systems may require 1–3 days. We assess and scope timelines during the planning phase and can work around your schedule.

What is the difference between oil flushing and high velocity oil flushing?

High velocity oil flushing uses controlled flow, heat, turbulence, and filtration to remove contamination from lubrication and hydraulic systems. Standard oil flushing may circulate oil through the system, but high velocity flushing is designed to create enough turbulent flow to dislodge particulate, debris, and built-up contamination from piping and system components.

When is high velocity oil flushing needed?

High velocity oil flushing is commonly used before equipment startup, after maintenance or repairs, during system commissioning, after contamination events, or when oil cleanliness levels do not meet the required ISO cleanliness target. It is often used for turbine systems, compressors, hydraulic systems, lube oil systems, and process piping.

Can I rent oil flushing equipment instead of hiring an on-site service crew?

Yes. PFP offers rental filtration equipment for facilities that need flushing skids, filter vessels, filter carts, and related equipment for temporary oil flushing or contamination control projects. If your team has the personnel and procedure in place, renting equipment may be a practical option.

Get a quick response.

As one of the most trusted flushing service providers in the U.S., we can develop and execute a flushing plan tailored to your industrial system. Call (888) 679-6645 or click below.